Easy home repairs: How to stabilize a rickety old chair
Home repairs don’t get much easier than this chair fix cheat!
Trying to keep a rickety old chair together without going through the trouble of taking it apart and re-gluing it? The simple home repair is to just drill pilot holes and drive trim-head screws through the bottom of the rungs and into the legs.
How to fix a vinyl window or door that sticks
When vinyl windows and doors don’t operate smoothly, it’s usually because gunk has built up in the channels. But sometimes even clean windows and doors can bind. Try spraying dry PTFE spray lubricant on the contact points and wiping it off with a rag. Don’t use oil lubricants for this quick home repair; they can attract dirt, and some can damage the vinyl.
Check out these budget-friendly ways to boost your home’s curb appeal.
Fixing a shutoff valve
There’s nothing worse than starting a sink or toilet repair only to find that the shutoff valve won’t, well… Shut off. Some shutoff valves are easy to replace. For those that aren’t, turn off the main water valve, remove the packing nut, and then unscrew the stem and take it to the hardware store to find a replacement washer. Clean any grit out of the valve body and pop on the new washer. The valve will work like new.
Find out six things professional plumbers never do in their own homes.
How to repair a loose showerhead
Here’s a quick home repair that can be used beyond the bathroom. Fix a wobbly showerhead, or any wobbly pipe, with a few squirts of expanding foam. The foam encases the pipe in the wall and locks it into place, eliminating the wobble, so your showerhead will work like new.
Here’s what you should know before hiring a contractor.
The quickest fix for a hole in the ceiling
Short on time and money? Instead of patching a hole in the ceiling (which usually means repainting the whole ceiling) just cover it with a smoke detector. No more hole, and added safety, to boot!
Brush up your fire safety skills.
A home repair that keeps cabinet doors closed
Here’s a 10-minute fix for a cabinet door that won’t stay closed: Just install a magnetic door catch. Roller-style ones also work, but it’s easier to line up a magnetic catch with the strike.
Taking on a major kitchen makeover? Be sure to check out Bryan Baeumler’s best kitchen reno tips.
How to fix a squeaky floor
Another quick home repair to keep in your files: To fix a squeaky floor under carpet, locate the floor joists with a stud finder, then drive in a trim head screw through the carpet, pad and subfloor, and right into the floor joist. Be sure the top inch of the screw doesn’t have threads or the subfloor won’t suck down tight to the joist. We like trim screws because screws with larger heads pull down and pucker the carpet. If that happens, back out the screw and drive it back down. Keep adding screws until the squeak stops.
Here are 13 secrets real estate agents want you to know.
How to get rid of a water stain on the ceiling
Before you go through the trouble of repainting a ceiling to get rid of a water stain, try this quick home repair. Spray the spot with a bleach and water solution (10 percent bleach), and wait a day or two. If it’s an old stain, use a mold and mildew remover from the grocery store. You’d be surprised how often the stain disappears by the next day. It works on both flat and textured ceilings. (Be sure to wear safety goggles, and make sure you protect the walls and floors with plastic.)
Discover more brilliant uses for bleach all around the house.
Another quick home repair for a ceiling stain
Hide tough ceiling water stains with a spray-on product called Upshot by KILZ. It’s blended to match an aged ceiling and even has a vertical spray tip, which makes installation a breeze. Lay a drop cloth on the floor and tape plastic on the walls before you spray.
Check out 20 painting tips the pros don’t want you to know.
A quick fix for a wallpaper seam that’s coming apart
If you have a wallpaper seam that’s coming apart, reactivate the paste around the gap with a rag soaked in warm water. Hold the rag over the area for a minute or two, and then carefully open the gap a little larger so you’ll have more room for the sealer. Squeeze seam sealer (white glue works in a pinch) into the gap, and press the paper to the wall with a roller. Clean off the excess sealer with a sponge.
Don’t miss these decorating tips from Brian Gluckstein, Canada’s most influential interior designer.
How to restore free flow to a faucet
When a kitchen or bathroom faucet loses pressure or starts spraying to the side, it’s usually due to a dirty aerator screen. Luckily, cleaning a screen is one of the easiest home repairs. Start this fix by closing the drain plug (so you don’t drop parts down the drain). Then remove the aerator using a rag or masking tape so you don’t mar the finish with your pliers.
To remove the sand and other deposits, soak the aerator in vinegar, then scrub it with a toothbrush. This usually solves the problem. If you have to disassemble the aerator to clean it, lay out the parts in the order you removed them so you can reassemble them correctly.
Check out 50 money-saving things to repurpose around the house.
How to unclog a toilet—with dish soap!
If the toilet plunger doesn’t seem to be doing the trick, try this solution before you reach for the snake: Squirt about 1/2 cup of liquid soap in and let it sit for a while. The liquid soap reduces friction and will often allow the contents of the bowl to slide on through.
Find out more genius tricks to unclog a toilet without a plunger.
A quick fix for a toilet that’s constantly running
Here’s a quick home repair to avoid a running toilet caused by a kinked toilet chain. Remove the chain from the arm attachment, and slide a plastic straw over the flapper chain, covering about two-thirds of the chain. Then reattach the chain to the arm. It’s that simple, and you’ll never have a running toilet caused by a kinked chain again.
Discover more dollar store solutions for life’s little dilemmas.
A DIY solution for stripped screws
A stripped screw can turn the simplest of home repairs into a two-hour nightmare. One of the best investments a DIYer can make is a screw extraction kit. It comes with different size bits and costs about $15. One side of the extractor bit reams a hole into the screw, and the other side has reverse threads that dig into the screw as you turn it out.
Here are 20 thrifty tricks to make everything you own last longer.
How to fix a loose drawer front in 10 minutes or less
Here’s a quick home repair for a drawer front that’s pulling off. Cut a couple of lengths of quarter-round the same height as the drawer sides. Hold them in place while you drill a couple of holes through the sides and front of the drawer box. Dab some polyurethane glue (wood glue doesn’t stick well to finished surfaces) on the pieces of quarter-round before screwing them into place. Ta-da!
Find out the home renovation mistakes that could send your property’s resale value into a tailspin.
Bent mini-blind driving you crazy? Try this quick home repair
Restore mangled mini-blinds with a mini-blind slat straightener. Just slide it over the damaged slat and squeeze. The product, called the MiniBlindRx, works on 1-inch metal slats and is available for around $30. (That’s a significant savings over replacing the mini-blinds entirely!)
After you’ve tackled these quick home repairs, check out nine home hacks that’ll stretch your decorating dollar.